Products

JUXIANG-T104

JUXIANG-T105

JUXIANG-T106

JUXIANG-T107

JUXIANG-T300

JUXIANG-T301

JUXIANG-T3002

JUXIANG-T303

JUXIANG-T304

PTFE4G 5G Laminate Film

Characteristics: For high frequency printed circuit board design compound high frequency substrate, the product has a low dielectric constant and medium Mass loss. The dielectric constant is between 2.14 and 2.65, and the thickness is between 0.127‑3.175mm.

Suitable industry: used in 4G base station and 5G base station antenna.
PTFE Electronic Buffer Film

Characteristics: excellent thermal conductivity, surface non‑sticky, good release, moisture resistance, high tensile strength, high electricity insulation, excellent resistance to high and low temperature, stable physical and chemical properties.

Suitable industry: COG/FOG binding cushioning heat‑insulation material, suitable for large, medium and small size modules, Its smooth surface, uniform temperature conduction and good stability are the main buffer materials for LCD line.
PTFE Modified Composite Film

Characteristics: High quality against ageing resistance, strong acid, strong alkali, high and low temperature resistance, good insulation, stable physical and chemical properties, modified film surface is translucent, enhance the fusion between the film and the film.

Suitable industry: Widely used in electronics, chemical, conveyor belt, outdoor roof and other fields
PTFE Double-Sided Sodium Membrane

Suitable industry: used for all kinds of cable covering, smooth surface, uniform temperature conduction, good stability.
PTFE Antistatic Film

Characteristics: excellent thermal conductivity, surface non‑sticky, good release, anti‑static effect is particularly good, moisture resistance, high tensile strength, high electricity excellent resistance to high and low temperature resistance, stable physical and chemical properties.

Suitable industry: COG/FOG binding cushioning heat‑insulation material, suitable for large, medium and small size modules, Its smooth surface, uniform temperature conduction and good stability are the main buffer materials for LCD line.
Virsin PTFE Adhesive Tabe Film Tape

Specialty: Good at antisticking, anticorrosive, high temperature resistance,low friction coefficient, arc resistance, Non-carbide, and has good electrical performance.

Length: 10m/20m/33m(Can be customized)
Thickness: 0.08mm/0.13mm/0.18mm/0.25mm
Width: 10mm-500mm(Can be customized)
PTFE + Glass Fiber Adhesive Tape

Specialty: High quality glass fiber was used as base material, Coated with high quality PTFE resin as the base cloth,finally be processed into tape with high technology. Good at High and low temperature resistance, anticorrosion, excellent insulation, uv resistance, and flame resistance performance.

Length: 10m/33m/66m (Can be customized)
Thickness:0.08mm/0.10mm/0.13mm/0.18mm/0.25mm
Width:10mm-1000mm (Can be customized)
PTFE Anti-static Adhesive Tape

Specialty: This tape was modified by PTFE to achieve anti-static effect, static index can be reached 10⁵， it was keeped original characteristics.Good at High temperature resistance, anticorrosion, antisticking, non-aging performance.

Length: 10m/33m/66m (Can be customized)
Thickness: 0.08mm/0.10mm/0.13mm/0.18mm/0.25mm
Width: 10mm-1000mm (Can be customized)
Pi Adhesive Tape

Specialty: Good at anticorrosion,antisticking, stickiness, high temperature resistance, anticorrosion, excellent insulation, low friction coefficient, High tensile strength performance.

Length: 10m/33m/66m (Can be customized)
Thickness: 0.08mm/0.10mm/0.13mm/0.18mm/0.25mm
Width: 10mm-1000mm (Can be customized)
Virgin PTFE Adhesive Tape

Specialty: Good at antisticking, anticorrosive, high temperature resistance, low friction coefficient, arc resistance, Non-carbide, and has good electrical performance.

Length:10m/20m/33m(Can be customized)
Thickness: 0.08mm/0.13mm/0.18mm/0.25mm
Width: 10mm-500mm(Can be customized)

JUXIANG-118609

JUXIANG-118603

JUXIANG-118615

JUXIANG-118602

HNBR Hydrogenated Nitrile O-ring

Characteristics: Hydrogenated nitrile rubber (HNBR) O-ring is a highly saturated elastomer obtained by special hydrogenation of nitrile rubber. Hydrogenated nitrile butadiene rubber (HNBR) O-ring rubber has good oil resistance. And because of its highly saturated structure, it has good heat resistance, excellent chemical corrosion resistance (good resistance to freon, acid and alkali), excellent ozone resistance, high compression resistance to permanent deformation; At the same time, hydrogenated nitrile rubber also has high strength, high tear performance, excellent wear resistance and other characteristics, is one of the most excellent comprehensive performance of rubber. The HYDROGENated nitrile butadiene_rubber (HNBR) O-ring is widely used in oil field and automobile industry. Hydrogenated nitrile rubber (HNBR) O-ring has a good performance in the use of extremely harsh field, is more and more used.

Scope of application: Oil equipment、Aeronautics and astronautics、Electronic instruments
EPDM Ethylene-Propylene Rubber O-Ring

Features: due to the lack of polarity and low unsaturation of EPDM ethylene propylene rubber, it has good resistance to various polar chemicals such as alcohol, acid, base, oxidant, refrigerant, detergent, animal and vegetable oils, ketone and grease, etc, and can resist acetone. EPDM rubber has excellent steam resistance and is estimated to be better than its heat resistance. In superheated steam at 230℃, the appearance has no change after nearly 10oh. And fluororubber, silicone rubber, fluorosilicone rubber, butyl rubber, nitrile rubber, natural rubber in the same conditions, experience a short time appearance of obvious deterioration phenomenon. EPDM ethylene propylene rubber has excellent electrical insulation and corona resistance, and its electrical properties are better than or close to those of styrene butadiene rubber, chlorinated polyethylene, polyethylene and crosslinked polyethylene.

Scope of application: Aeronautics and astronautics Chemical production
Silicon O-ring

Features: Silicon silicone O-ring has super high and low temperature resistance, can work at-40~200℃ fora long time. Silicon silicone O-ring has excellent aging resistance, high and low temperature resistance, with super insulation performance. Silicon silicone O-ring can meet the requirements of food grade, can be used in food processing industry, medical industry.

Scope of application: Oil equipment、Aeronautics and astronautics、Chemical production、Electronic instruments
Perflurane FFKM rubber O-ring

Features: Perfluoroether FFKM rubber O-ring is the most expensive rubber elastomer sealing ring sold at present, with extraordinary chemical resistance, resistance to lipids, alcohols, ethers and other chemicals erosion, almost all chemical erosion. Compared with PTFE O-ring, PERfluoroether FFKM O-ring has good elasticity, minimal compression deformation, higher temperature resistance grade, better sealing performance. High temperature resistant brand can be used in 280 degrees environment for a long time.

Scope of application: Close the instrument、Aeronautics and astronautics、Chemical production、semiconductor
PFA Rod, Tube

Name

Diameter

Length

Molded rod

ø5‑500

50‑400mm

Extruded rod

ø5‑80

1000mm

Tube

ø20‑3000

50‑100mm

Note: Special sizes can be customized
PFA Special connectors
PFA Cable ties

about us

About Jiaxiang

Zhejiang Jiaxiang Fluoroplastics Co., Ltd. is a professional solution provider of fluoroplastics and high-performance engineering plastics. Our core products cover a full range of fluororesins and high-performance engineering plastics including PTFE, PFA, FEP, PEEK, PI, PVDF, as well as customized processed products, which are widely used in global high-end manufacturing fields such as semiconductor, hydrogen energy, aerospace, automotive, petrochemical, environmental protection, and medical.

0 m²

Production Base Area
0+

Export Country
0+

Technical staff
0+

Industry Experience

Certificate Of Honor

news

News Center

23th Jun 2026

Global New Energy & Chemical Industries Boost Fluoroplastic Export Demand

Booming new energy, fine chemical and semiconductor sectors push up international demand for full-se...
23th Jun 2026

Modified PTFE Composite Boards Break Barriers in Chemical Anti-Corrosion Field

Sodium-treated PTFE panels and PTFE/PFA glass fiber composite boards make key technical progress in ...
23th Jun 2026

Aviation & Aerospace Fluorine Sealing Materials Achieve Performance Upgrade

Newly optimized modified PTFE composite sealing products are widely applied in aircraft and aerospac...
23th Jun 2026

Semiconductor Grade High-Purity Fluoroplastic Parts See Surging Global Orders

The global semiconductor industry’s continuous capacity expansion fuels rising demand for high-purit...

Message Feedback

Products Industry knowledge

X Facebook

Products News

Properties	Unit	Result
Tensile Strength (min) ≥	Mpa	11
Elongation at break ≥	%	80
Apparent density	g/cm³	2.0–2.1
The coefficient of friction (dynamic)	/	0.300

Properties	Unit	Result
Tensile Strength (min) ≥	MPa	15
Elongation at break ≥	%	150
Apparent density	g/cm³	2.0–2.1
The coefficient of friction (dynamic)	/	0.195

Properties	Unit	Result
Tensile Strength (min) ≥	MPa	13
Elongation at break ≥	%	80
Apparent density	g/cm³	2.0–2.1
Dynamic coefficient of friction	/	0.198

Properties	Unit	Result
Tensile Strength (min) ≥	Mpa	15
Elongation at break ≥	%	150
Apparent density	g/cm³	2.0–2.1
The coefficient of friction (dynamic)	/	0.200

Properties	Unit	Result
Tensile Strength(min) ≥	Mpa	15
Elongation at break ≥	%	150
Apparent density	g/cm³	2.8–3.0
The coefficient of friction (dynamic)	/	0.25

Web Menu

Product Search

Language

Exit Menu

Products

Product categories

Products

Quick Links

Products

aBOUT US

Contact info.

QR Code

Properties	Unit	Result
Tensile Strength(min)	Mpa	14‑16
Elongation at break	%	160‑230
Apparent density	g/cm³	2.6‑2.7
The coefficient of friction(dynamic)	/	0.125
Specification: Outer diameter 25.6mm inner diameter 20.2mm thickness 0.8mm

Properties	Unit	Result
Tensile Strength(min)	Mpa	14‑16
Elongation at break	%	160‑230
Apparent density	g/cm³	2.6‑2.7
The coefficient of friction(dynamic)	/	0.125
Specification: Outer diameter 29.5mm inner diameter 24.1mm thickness 0.8mm

Properties	Unit	Result
Tensile Strength(min)	Mpa	14‑16
Elongation at break	%	160‑230
Apparent density	g/cm³	2.6‑2.7
The coefficient of friction(dynamic)	/	0.125
Specification: Outer diameter 36.8mm inner diameter 26.4mm thickness 0.75mm

Name	Diameter	Length
Molded rod	ø5‑500	50‑400mm
Extruded rod	ø5‑80	1000mm
Tube	ø20‑3000	50‑100mm

Web Menu

Product Search

Language

Share

Exit Menu

Products

Product categories

Products

Quick Links

Products

aBOUT US

Contact info.

QR Code